Fireplace installation in Tyler TX - the right fireplace for your house and fuel
Fireplace sitting unused, or a room with none? We'll help you choose wood, an insert or gas, and our crew will put it in right.
The owner writes every estimate
I come out myself to look at your room, chimney and firebox and write the estimate. On site, a lead mason runs our crew, so you hear how the job's going without having to chase anybody down.
Our own crews in Tyler since 2013
I ran crews for another masonry owner for years before I started on my own in Tyler in 2013. We're based here and work the cities around it, and we're best known for masonry that blends in with the old work.
Licensed and insured on every job
We're licensed and insured, and I'd rather tell you what can wait than sell you work you don't need. When you're ready, call (903) 525-6451 or use our estimate form and tell us what fireplace you have now.
Fireplace installation in Tyler, TX
Fireplace installation in Tyler means putting in a new wood-burning fireplace, either traditional masonry or a factory-built unit, or fitting an insert into the firebox you already have. It suits homeowners who want a real fire for the look and some extra warmth, which is what most fireplaces are for.
Price moves most with the kind of job. Fitting an insert into a firebox that's already sound is a smaller job than building a masonry fireplace where there wasn't one, and a gas unit adds the cost of its venting route. The brick or stone on the face, and any chimney work the old fireplace needs first, push the number up or down too. Your estimate spells out what needs doing now and what can wait.
The schedule turns on the same choices. An insert usually goes in faster than a new masonry fireplace, and a chimney that needs work first can add time. We check with the City of Tyler on each job, and when a permit is needed we file it and keep the paperwork moving. Before we start, it helps to clear the space around the fireplace and know whether you want it mostly for the look or for some extra warmth.
Fireplaces, surrounds and the masonry around them
Starting with your firebox and fuel
Before we talk models, I find out whether you've got a masonry fireplace or a factory-built one and whether you want to burn wood or gas, because that narrows the choices fast. A sound masonry firebox can often take an insert, while a room with no fireplace means a new masonry build or a factory-built unit. I'll be straight with you about what to expect from it once it's in, so the first cold night holds no surprises.
Building the firebox and surround
For a traditional masonry fireplace, our crew lays up the firebox and chimney core, often on a base of concrete block walls that carries the weight, then finishes the face. Brick can be matched to the rest of your house, or we can do a stone veneer installation over the block for the look of stone without the bulk. Either way, I want the surround to look like it belongs to the room, not like it showed up last week.
Gas venting and Tyler's code rules
If you go with gas, a vented unit can run up your existing chimney or straight out through the roof or the wall behind it. Gas inserts burn natural gas or propane cleanly, but efficiency varies a lot between models, so it's worth comparing before you buy. Tyler has adopted the standard model code for homes with its own local changes, and it wants building plans to meet its residential, mechanical, fuel gas and electrical codes. The city's permit list names building, roof, electrical and plumbing work but not fireplaces, so the list alone doesn't answer it for your job.
Get a fireplace estimate for your Tyler home
We get back to you within one business day to set a visit, and I give you a free estimate on site, no pressure to book. Tell us if your fireplace is masonry or factory-built and what fuel you want.
(903) 525-6451How a fireplace job goes with us
Call or send a message
Call (903) 525-6451 or use the form, and we'll get back to you to set up a visit. It helps to know what you've got now, a masonry firebox, a factory-built unit or no fireplace, and which fuel you're leaning toward.
I look it over and estimate
I come out, look at the room, the chimney and whatever's there now, and write your estimate. It spells out what needs doing now and what can wait, so you see where the money goes before you decide anything.
Permit, the build and a walkthrough
If you say yes, we sort out any permit with the city, then our lead mason runs the crew through the install. When it's done, I walk the finished fireplace with you and show you how it's meant to run.
Fireplace installation questions in Tyler
Will an insert fit my factory-built fireplace in Tyler?
It will if the insert is designed and tested specifically for your factory-built unit, sometimes called a zero-clearance fireplace. Federal EPA guidance says sticking with an insert made for your unit means it runs more efficiently and pollutes less. Have the unit's make and model handy when you call.
Will a new fireplace heat my whole home in Tyler?
Usually not, because a wood-burning fireplace is a very inefficient heater. Its draft can pull warm air up the chimney and leave other rooms cooler, so your central heat works harder while a fire's going. Plan on a wood fireplace for the look and some extra warmth in that room.
Is a vent-free gas fireplace a good choice for my home?
Federal guidance says no. The EPA doesn't support gas units built to run without outside venting because of indoor air quality, and some places make them illegal to install, so a vented unit is the place to start. The EPA also advises having any stove, gas included, installed by a certified technician and inspected every year.
How much does fireplace installation cost in Tyler, TX?
Fireplace installation across the US usually costs about $2,000 to $10,000 per job, and that's a national range, not our price. Where your job lands depends mostly on whether it's an insert or a new masonry build, how the unit vents and what goes on the face. Call (903) 525-6451 and I'll come look at yours.